||
澳门新萄京官方网站
x
x

 Product Center Guidance

Low-alloy HSS

Low alloyed high speed steel refers to the high speed steel with tungsten (=W+1.8Mo)content of 6.50-11.75%. Heat resistance and wear resistance of low alloyed high speed steel reduces, which can be applied into the material with low cutting speed requirem

Mfrs:HEYE Special Steel Co.,Ltd

Sales manager:Fan Mancang

E-mail:fmc@hss-cn.com

Product manager:Sun Zonglin

E-mail:szl@hss-cn.com

Made in:Hebei,China

Tel:0311-88382262

Fax:0311-88382288

Tel:0311-88382021

Fax:0311-88382027

Application domain:The drill bit, saw blade, sliding vane.

Product introductionProduct specificationsOnline consulting Product information download

Low alloyed high speed steel refers to the high speed steel with tungsten (W1.8Mo)content of 6.50-11.75%.Low alloyed high speed steel is manufactured by increasing carbon content and adding the secondary hardening of alloying elements, reducing expensive alloying elements of tungsten and molybdenum. Hardness can reach HRC63-65 after quenching and tempering. Heat resistance and wear resistance of low alloyed high speed steel reduces, which can be applied into the material with low cutting speed requirement.

 

Our company provide HYW3V2, HYW4, HYM50 brand.

 

HYW3V2, carbide fine uniform, high quenching tempering hardness, machining process performance, excellent wear resistance. HYW3V2 is mainly used in the manufacture of paper knife, such as cloth cutting knives, blade cutter.

 

HYW4, carbide particles small, high quenching tempering hardness, good performance of machining process, good wear resistance. HYW4 is mainly used for manufacturing drills, taps, hand saw blade, saw blade cutting speed is not high, such as knives, can also be used for cold work mould.

  

HYM50, carbide fine uniform, high quenching tempering hardness, the performance of machining process, the wear-resisting performance. HYM50 mainly used in the manufacture of engine vane or sliding vane compressor, etc.

Specification
Type Specification (mm) Surface condition
Forged Round Bar 80-300 Turned/Black
Hot-rolled Round Bar 8-25 Black
21-95 Turned/Peeled
Peeled Bar 15-150 Turned
Hot-rolled Square Bar 7.2×7.227×27 Black
Hot-rolled Flat Bar (3.5-40)×(16-100) Black/Shot Blast
Forged Flat Bar (20-200)×(40~400) Black/Milling
Hot-rolled Wire Rod 5.5-17 Black/Blasting Bickling
Cold-drawn Steel Wire 2.0-16.5 Black
Ground Wire 5.0-14.5 Ground
Steel Plate (2.0-15.0)×(500-700) Black
Hot-rolled Strip (36-65)×(1.5-3.0) Black
Cold-rolled Strip (25-55)×(0.65-1.80) Polished
Forged Product Circular(50-350)×(10-300) Black/Machined
Rectangle(20-200)×(5-80)
Welded-blank, wimble blank, roller blank, hollow broacher blank, prefabricated Shield roll ring and other extension product.
Name:* Tel: E-mail:*
Message: 
Code:Click to get verification code

Please click on the following material or product name to view or download.

 

1Flat Bar

 

2Steel Sheet

丨Legal declaration

丨Privacy protection

 Copyright 2016 by heye(Hss-Cn.com)ICP12013182
Contact

Sales hotline:

0311-88382258/2268(domestic sales)

0311-88382296/2299(International Sales)

Service hotline:

0311-88382266