|www.995577.com
www.4473.com新普金
x
x
www.995577.com

 Product Center Guidance

澳门葡京www.3189com

Spray Forming HSS

Because of inert gas atomization and rapid solidification of droplet deposition ,the spray formed HSS has low oxygen content , overall high density and fine microstrcture.

Mfrs:HEYE Special Steel Co.,Ltd

Sales manager:Shen chunjie

E-mail:scj@hss-cn.com

Product manager:Du wenhua

E-mail:dwh@hss-cn.com

Made in:Hebei,China

Tel:13373113268

Fax:0311-88382288

Tel:13582016962

Fax:0311-88382027

Application domain:drill,end mill knives, gear cutter, broach and other cutting tools.

Product introductionProduct specificationsOnline consulting Product information download 新萄京娱乐3730

HEYE Special Steel Co., Ltd is the first to achieve industrialization in domestic.Spray forming technology is atomizing the molten metal or alloy in an inert atmosphere into small solid, semi-solid or liquid melt jet, then spraying directly onto the cold substrate surface, droplet deposition on the surface adhesion, accumulation, spreading, fusion, consolidation and the formation of deposited blank. Common grades of Spray Forming HSS include HSF630HSF838HSF835HSF640HSF758HSF8610HSF680 etc.At present more mature types of steel include HSF620, HSF835 and HSF680 .

 

The composition of HSF620 is similar to traditional M2, The tensile strength of Spray formed HSF620 with ultra-fast solidification increases by 25% than the traditional HSS ( ESR + forging ), and toughness increases by 70-100%. At present, HSF620 is used to make large cross-section broach.

 

HSF835 is a cobalt and high vanadium containing spray formed high speed steel of our own R&D. It is used as cutting tools and dies with excellent wear resistance and toughness.At present, it is used to make broachhobgear shaving cutter etc.

 

HSF680 is a high vanadium and high speed steel with high hardness and excellent wear resistance . It is an ideal material for tools or components requiring high wear resistance. It is mainly used in the field of higher wear resistance requirement.

Specification
Type Specification (mm) Surface condition
Forged Round Bar 80-300 Turned/Black
Hot-rolled Round Bar 8-25 Black
21-95 Turned/Peeled
Peeled Bar 15-150 Turned
Hot-rolled Square Bar 7.2×7.227×27 Black
Hot-rolled Flat Bar (3.5-40)×(16-100) Black/Shot Blast
Forged Flat Bar (20-200)×(40~400) Black/Milling
Hot-rolled Wire Rod 5.5-17 Black/Blasting Bickling
Cold-drawn Steel Wire 2.0-16.5 Black
Ground Wire 5.0-14.5 Ground
Steel Plate (2.0-15.0)×(500-700) Black
Hot-rolled Strip (36-65)×(1.5-3.0) Black
Cold-rolled Strip (25-55)×(0.65-1.80) Polished
Forged Product Circular(50-350)×(10-300) Black/Machined
Rectangle(20-200)×(5-80)
Welded-blank, wimble blank, roller blank, hollow broacher blank, prefabricated Shield roll ring and other extension product.
Name:* Tel: E-mail:*
Message: 
Code:Click to get verification code

Please click on the following material or product name to view or download.

 

1HSF640

 

2HSF680

 

3HSF755

 

4HSF838

 

5HSF8610

 

6Flat Bar

 

7Steel Sheet

www.995577.com

丨Legal declaration

丨Privacy protection

 Copyright 2016 by heye(Hss-Cn.com)ICP12013182
Contact

Sales hotline:

0311-88382258/2268(domestic sales)

0311-88382296/2299(International Sales)

Service hotline:

0311-88382266