新蒲京官方网站39499
|www.997755.com
x
x新澳门葡京官方网站

 Product Center Guidance

  • www.997755.com

Powder Metallurgy HSS

Powder metallurgy HOP HSS is featured by its fine and evenly distributed carbides in the matrix, and therefore has the special preoperties of high toughness in all directions. As compared to HSS produced through other metallurgical process, the PM HSS can

Mfrs:HeYe Special Steel Co.,Ltd.

Sales manager:Fan Mancang

E-mail:fmc@hss-cn.com

Product manager:Zheng Wei

E-mail:hy.zw@163.com

Made in:Hebei,China

Tel:0311-88382262

Fax:0311-88382288

Tel:0311-88382066

Fax:0311-88382027

Application domain:Cutting tool

新蒲京官方网站39499
Product introductionProduct specificationsOnline consulting Product information download

HEYE HOP series products are powder metallurgically produced high speed steels featured by its fine and evenly distributed carbides particles in the matrix. Because of its refined microstructure, HOP products are isotropic and high in  ductility, wear resistance, toughness as compared to traditional HSS. It is worth to mention that the bending strength and the toughness of PM HOP products are 50-100% better than that of normal HSS. Comparing to carbide, the PM HOP products have good machinability and grindability and are better choice for the materials of complex shaped cutting tools.

 

Many success cases for the PM HOP products used as the tool materials of large size, complex shape in automotive, aviation, aerospace, energy industries. HOP products can really be a problem solver tool materials due to its refined microstructure which cannot be matched by the traditional HSS containing a lot of irregularly distributed coarse carbides.

 

Cutting tools of PM HOPT15M materials can use higher cutting speed under dry cutting conditions with relatively satisfactory tool life. It is one of the effective method to improve the productivity and reduce the machining cost.

 

Cutting tools of PM HOP2030 materials can be used for high-speed cutting difficult to machine, such as taps, etc., and to enhance the ability of intermittent cutting, can significantly increase productivity and reduce unit processing costs.

Specification
Type Specification (mm) Surface condition
Forged Round Bar 80-300 Turned/Black
Hot-rolled Round Bar 8-25 Black
21-95 Turned/Peeled
Peeled Bar 15-150 Turned
Hot-rolled Square Bar 7.2×7.227×27 Black
Hot-rolled Flat Bar (3.5-40)×(16-100) Black/Shot Blast
Forged Flat Bar (20-200)×(40~400) Black/Milling
Hot-rolled Wire Rod 5.5-17 Black/Blasting Bickling
Cold-drawn Steel Wire 2.0-16.5 Black
Ground Wire 5.0-14.5 Ground
Steel Plate (2.0-15.0)×(500-700) Black
Hot-rolled Strip (36-65)×(1.5-3.0) Black
Cold-rolled Strip (25-55)×(0.65-1.80) Polished
Forged Product Circular(50-350)×(10-300) Black/Machined
Rectangle(20-200)×(5-80)
Welded-blank, wimble blank, roller blank, hollow broacher blank, prefabricated Shield roll ring and other extension product.
Name:* Tel: E-mail:*
Message: 
Code:Click to get verification code

Please click on the following material or product name to view or download.

 

1Flat Bar

 

2Steel Sheet

新莆京388
新莆京388

丨Legal declaration

丨Privacy protection

 Copyright 2016 by heye(Hss-Cn.com)ICP12013182
Contact

Sales hotline:

0311-88382258/2268(domestic sales)

0311-88382296/2299(International Sales)

Service hotline:

0311-88382266